]WHY NOMAFLEX?

Nomaflex can be stored outside and will not absorb water, break, flake or leach. It is flexible, yet rigid enough to be passed across a wet pour and can be used as a form. Nomaflex is less expensive to install and can be installed using traditional installation methods. Common residential, commercial and industrial installations using Nomaflex include, but are not limited to: sidewalks, streets, driveways, highways and airport runways.

Nomaflex fully complies with ASTM standard specification D8139, and ASTM standard specification D1751 for extrusion, compression recovery and water absorption as tested per ASTM test method D545.

PERFORMANCE

Nomaflex is a closed-cell polypropylene foam that can be used in residential, commercial, civil, municipal and industrial applications. It will not absorb water, swell and disintegrate and it extends the service life of concrete by reducing the amount of imcompressible materials entering the joint. Nomaflex does not impede sealant cure time and can be used without a bond breaker with no impact on the long term performance of the sealant.
Features
• No waste due to breakage
• Ultra lightweight
• Flexible, bends around circular structures
• Moisture resistant
• Can be stored outside
• Traditional methods used for installation
• Can be used with hot-pour and cold-applied sealants
• Clean product • Inert
• Odor-free
• Recyclable
• Reusable
• Made in USA
Nomaflex resists oils, gas, salts, acetone and other chemicals. It does not leach like other products and is not sticky. Nomaflex fully complies with ASTM standard specification D 8139, and ASTM standard specification D 1751 for extrusion, compression recovery and water absorption as tested per ASTM test method D 545.

INSTALLATION
Nomaflex is a flexible yet semi-rigid foam that can be passed across wet pours without breaking. It transports easily and is light enough that one person can easily carry multiple bundles.
Nomaflex can be used with all hot-pour or cold-applied sealants and prevents 3-sided sealant adhesion. The Nomaflex Cutter is a tool that creates a 1/2” tear-off strip that once removed, creates a void for sealants. The tear-off strip remains attached until the installer removes it. Nomaflex is also compatible with plastic edge caps and should be installed 1/2” below the concrete surface prior to pouring concrete. Nomaflex can be used as a form and should be installed against any edge where concrete is poured and an expansion joint is required. Spray adhesives and can be used on Nomaflex.